Water conservation while using irrigation devices of multiple supports in the conditions of the Moscow region
Mots-clés :
Irrigation machine (IM); slipping of carts; sloping lands; tow-grip crossing capacity; water-harvesting formation.Résumé
The paper focuses on problem of water quality around irrigated soils. It was discovered that flushing of the fertile layer occurs on terrains near protected watersheds because of destroying irrigation procedures. The modernization of irrigation machines has been suggested as a solution for above-mentioned problem. The technological features of circle irrigation machines (IM) in the conditions of complicated soil relief are defined by their supportings including: tow-grip crossing capacity and slipping of carts on the slope. The operating results have been given according to evaluation of IM work in difficult conditions with the picture of their changes in the diagram dependences. The above-mentioned devices are improved to create environmentally friendly and energy-saving solutions in order to enhance the reliability of IM while watering sloping lands In the area of softening of complex soils that refers to the safety and quality of maintenance while the reduction in the amount of water and energy consumption as well as the cost of irrigation system structure, the scientific concepts are searching for tools to providing highly efficient IM work. The main goal of the work is using the obtained results of research in a practical way as to create and modify IM in order to exercise the irrigation tools conveniently and also generally determine the efficiency of machinery while reducing energy and water consumption as well as providing soil cooling technologies using water from irrigation.
Téléchargements
Références
Chu, S. T., Onstad, C. A., & Rawls, W. J. (1987). Macropores in the soil infiltration process. American Society of Agricultural Engineers (Microfiche collection) (USA).
DeBoer, D. W., & Chu, S. T. (2001). Sprinkler technologies, soil infiltration, and runoff. Journal of irrigation and drainage engineering, 127(4), 234-239.
Keller, J., & Bliesner, R. D. (1990). Sprinkle and trickle irrigation. Van Nostrand Reinhold Press, New York, USA, 440 pp.
McCann, I. R., & Stark, J. C. (1993). U.S. Patent No. 5,246,164. Washington, DC: U.S. Patent and Trademark Office.
Ryazantsev, A. I. & Afanasiev, V. M. (1989a). The device for levelling of ground rut. Auth.cert. ?1482547, Bul. ? 14,
Ryazantsev, A. I. & Kirilenko, N.Y. (2007). etc. Russian Federation Patent No. 62772."Multisupport circle irrigation machine" Byull. Izobret 13
Ryazantsev, A. I. & Olgarenko, G. V. (2005a). Russian Federation Patent No. 48247." Environmentally friendly circle irrigation machine" Byull. Izobret 28 .
Ryazantsev, A. I. (1984). The wheel of multisupporting irrigation machine gear. Auth.cert. ?1069721 USSR, Bul. ?4,
Ryazantsev, A. I. (1989b). Improving of crossing capacity of multisupporting circle irrigation machines. Ath.cert. ?1386114 USSR, Bul. ?13,
Ryazantsev, A. I. (1992). Preparation method of irrigation machines for work. Auth .cert. ?1706467 USSR, Bul. ?3,
Ryazantsev, A. I., & Afanasiev, V. M. (1990). The device for levelling of ground rut. Auth.cert. ?1542491, Bul. ? 6,
Ryazantsev, A. I., & Antipov, A.O. (2015) Improvement of braking system of irrigation machine Fregat. Machines and Equipment for the countryside, 11, 32–35.
Ryazantsev, A. I., & Antipov, A.O. (2016a). The running of transport systems of multisupport machines. Kolomna: GOU VO MO GCGU, 225.
Ryazantsev, A. I., & Antipov, A.O. (2016b). Technical-running features of multisupport electrified irrigation machine of new generation Kuban-LK1. Vestnik RGATU. 2, 83–87.
Ryazantsev, A. I., & Erokhin, B. M. (1994). Russian Federation Patent No. 2021702."Multisupport circle irrigation machine" Byull. Izobret 20
Ryazantsev, A. I., & Olgarenko, G. V. (2005b). Russian Federation Patent No. 43727."Multisupport circle irrigation machine" Byull. Izobret 4 .
Ryazantsev, A. I., & Olgarenko, G. V.(2006). Russian Federation Patent No. 54277." Multisupporting low-power electrified circle irrigation machine" Byull. Izobret 18.
Ryazantsev, A. I., & Tsentsiper, M. L. (1988). Multisupporting circle irrigation machine. Auth.Cert. ?1438661 USSR, Bul. ? 43
Schneider, G., & Leinweber, C. (2003). U.S. Patent No. 6,607,147. Washington, DC: U.S. Patent and Trademark Office.
Scott, L. W., & Kulberg, K. (1997). U.S. Patent No. 5,699,962. Washington, DC: U.S. Patent and Trademark Office.
Scott, L. W., & Kulberg, K. (1997). U.S. Patent No. 5,699,962. Washington, DC: U.S. Patent and Trademark Office.
Scott, L. W., & Lousberg, B. M. (1995). U.S. Patent No. 5,456,411. Washington, DC: U.S. Patent and Trademark Office.
Sulistyaningsih, D., & Aziz, A. (2018). Development of Learning Design for Mathematics Manipulatives Learning based on E-learning and Character Building. International Electronic Journal of Mathematics Education, 14(1), 197-205.