Efecto gestión de la cadena de suministro en el desempeño de pyme manufacturera. Aguascalientes, México.
Palabras clave:
Gestión de la Cadena de Suministro, Desempeño, Pyme Manufacturera, Modelo Teórico.Resumen
El presente trabajo de investigación tiene como objetivo proponer un modelo teórico conformado por el bloque de Gestión de la Cadena de Suministro (GCS), el cuál está integrado por las dimensiones de estrategias y colaboración con los proveedores y por el bloque de desempeño. En la metodología, se realizó el trabajo de campo con la participación de gerentes de Pymes Manufactureras en Aguascalientes. La muestra estuvo constituida por 288 empresas. Los datos recolectados se analizaron con la técnica estadística de análisis de ecuaciones estructurales apropiada para el diseño de modelos teóricos con apoyo del software EQS. En los resultados se muestra que las GCS a través de las estrategias y colaboración con los proveedores, tienen una influencia significativa en el desempeño de la Pyme Manufacturera, lo cual permite resaltar que los empresarios deben implementar estrategias que impacten directamente sobre los beneficios que conlleva a la excelente relación con los proveedores puesto que su participación influye de manera significativa no solo en el tema de la GCS sino en el desempeño de la Pyme Manufacturera.
Descargas
Los datos de descargas todavía no están disponibles.
Citas
Aguilera, E. L., Hernández, C. O. & López, T. C. G. (2012). La gestión de las cadenas de suministro y los procesos de producción. Mercados y Negocios, 13(2), 43-66.
Amid, A., Ghodsypour, S. & O'Brien, C. (2006). Fuzzy mult i objective linear model for Supplier selection in a supply Chain, International Journal of Production Economics, 104 (2), 394-407.
Anderson, J. & Gerbing, D. (1988), “Structural equation modeling in practice: a review and recommended two-step approach”, Psychological Bulletin, (13), 411-423.
Araz, C. & Ozkarahan, 1. (2007), Supplier evaluation and management system for strategic sourcing based on a new multicriteria sorting procedure, International Journal of Production Economics, 1, 585-606
Ayers, J. B. (2001 ). Handbook of supply chain management. Boca Raton. Fla.: The St. Lucie Press/APICS Series on Resource Management.
Bagozzi, R. & Yi, Y. (1988), “On the evaluation of structural equation models”, Journal of the Academy of Marketing Science, 16 (1), 74-94.
Ciborra, C. U. (1993). Teams, markets and systems. Cambridge: Cambridge University Press
Cheti, C, Lin, T. & Huang. S. (2006). A ftizzy approach for supplier evaluation and selection in supply chain management, International Journal of Production Economics, 102 (2), 289-301.
Christopher, M. (1998). Logistics and Supply Chain Management, 2 Ed. New York: Financial Times/Prentice Hall
Christopher, M. (1998). Strategies for reducing costs and improving services. En Logistics and Supply Chain Management. London: Pitman Publishing
Chow, D., & Heaver, T. (1999). Logistics strategies for North America. En Global Logistics and Distribution Planning. 3rd ed.
De Boer, L., Labro. E. & Morlacchi, P. (2001). A review of methods supporting supplier selection, European Journal of Purchasing and Supply Management, 1 (2), 75-89.
Faez, F., Ghodsypour, S. & O'Brien, C. (2006). Vendor selection and order allocation using an integrated fuzzy case-based reasoning and mathematical programming model, International Journal of Production Economics, 1, 394-407.
Fornell, C. & Larcker, D. (1981). Evaluating structural equation models with unobservable variables and measurement error. Journal of Marketing Research, 18, (19, 39-50.
Forbes.com. (2006). Logistics glossary. Recuperado el 1 de July de 2011, de [Online] Avaible: http://www.forbes.com/fdc/logistics/glossary_d.shtml http://www.emeraldinsight.com/Insight/ViewContentServlet?Filename=Published/EmeraldFullTextArticle/Articles/0240150405.htm
Grant, D., Lambert, D., Stock, J., & Ellram, L. (2006). Fundamentals of logistics management, European Edn. Berkshire: McGraw-Hill Book Co.
Hair, J. F., Anderson, R. E., Tatham, R. L. & Black, W.C. (1995). Multivariate Data Analysis with Readings. New York: Prentice-Hall.
Hatcher, L. (1994). A Step by Step Approach to Using the SAS System for Factor Analysis and Structural Equation Modeling, Cary, NC, SAS Institute Inc.
Hernández, C. O., Aguilera, E. L. & González, A. M. (2014). The Influence of information Technology and communication Supply Chain management performance for greater sme manufacturing in Aguascalientes, International, Journal of Business, Economics and Management, 1(12), 382-396.
Hernández, C. O., Aguilera, E. L. & Colín, Salgado, M. (2013). La Gestión de los Proveedores: Estrategia clave para una mejor Gestión de la Cadena de Suministro en la Pyme Manufacturera en Aguascalientes. Estudios de Ciencias Sociales y Administrativas de la Universidad de Celaya, 3(1), 9-20.
Jitesh, T. (2008). Evaluation of buyer-supplier relationships using an integrated mathematical approach of interpretive structural modeling (ISM) and graph theoretic matrix: The case Study of Indian automotive SMEs Jitesh Thakkar, Journai of Manufacturing Technoiogy Management, l9 (1), 92-124.
Lee, S., & Peterson, S. (2000). Culture, entrepreneurial orientation, and global competitiveness. Journal of World Business, 35(4), 401-416.
Liao. Z. & Rittscher, J. (2005). A multi-objective supplier selection model under stochastic demand conditions, Internationaljournal of Production Economics, 105(1), 150-159.
Liu, F. & Hai, H. (2005). The voting analytic hierarchy process method for selecting Supplier, Internationaljournal of Production Economics., 97 (3), 308-317.
Little, A. (1999). A European Supply Chain (SC) survey, Available:http://www.adlittle.be/insights/studies/pdf/european_supply_chain_survey.pdf.
Masella, C. (2007). A contingent approach to the design of vendor selection systems for different types of co-operative customer/ supplier Relation ships, ¡nienmtional Journal of Operation.s and Production Management, 20( 1 ), 70-84.
Mbang, J. A. (2012). A new introduction to supply chains and supply chain management: Definitions and theories perspective. International Business Research, 5(1), 194-207.
Neely, A., Gregory, M., & Platts, M. (1995). Performance measurement system design: A literature review and research agenda. International Journal of Operations and Production Management, 15(4), [Online] Available:
New, S. & Philip P. (1995). Research Frameworks in Logistics: Three Models, Seven Dinners and a Survey, International Journal of Physical Distribution and Logistics Management, 25(10), 60-77
Nunnally, J.C. and Bernstein, I. H. (1994), Psychometric Theory, 3ª ed. New York: McGraw-Hill.
Osorio, G. J. C., Herrera, U. M. F. y Vinasco. M. A. (2008). Modelo para la evaluación del desempeño de los proveedores utilizando AHP, Ingeniería & Desarrollo, 23, 43-58.
Panayides, P. (2006). Maritime logistics and global supply chains: Towards a research agenda. Maritime Economics & Logistics, 8(1), 3-18. Recuperado de http://dx.doi.org/10.1057/palgrave.mel.9100147.
Pramatari, K. and Miliotis. P (2008). The impact of collaborative store ordering on shelf availability.Supply Chain Management, An International Journal, 13(1), 49-61
Raymond, L. and St-Pierre, J. (2005). Antecedents and performance outcomes of advanced manufacturing systems sophistication in SMEs. International Journal of Operations and Production Management, 25(5-6), 514-533.
Sarache, C. W. A., Castrillón, G. O. D. & Ortiz, F. L. F. (2009), Selección de proveedores: Una aproximación al estado del arte, Cuadernos de Administración de Bogotá, 22 (38), 145-167.
Simchi, L. D., Kaminsky, P., & Simchi, L. E. (2008). Designing and managing the supply chain: concepts, strategies and case studies. Tecc.com.au. (2002). [Online] Recuperado de http://www.tecc.com.au/tecc/guide/glossary.asp: International Edition: McGraw-Hill.
Simchi-Levi, D., Kaminsky, P. & Simchi-Levi, E. (2000). Designing and Managing the Supply Chain. 4ta. Ed. New York: Irwin McGraw-Hill
Tyan, J., Wang, F.K. & Du, T. (2003). An evaluation of freight consolidation policies in global third party logistics. Omega, 31, 55–62
Wisner, J.D. (2003). A Structural Equation Model of Supply Chain management Strategies and Firm Performance, Journal of Business Logistics. 24(1), 1-26.
Wong, W., & Wong, K. (2007). Supply chain performance measurement system using dea modeling. Industrial Management & Data Systems, 107(3), [Online] Recuperado de http://emeraldinsight.com/Insight/ViewContentServlet;jsessionid=E57B39C6CE4796DA8D44590D80E6077B?
Amid, A., Ghodsypour, S. & O'Brien, C. (2006). Fuzzy mult i objective linear model for Supplier selection in a supply Chain, International Journal of Production Economics, 104 (2), 394-407.
Anderson, J. & Gerbing, D. (1988), “Structural equation modeling in practice: a review and recommended two-step approach”, Psychological Bulletin, (13), 411-423.
Araz, C. & Ozkarahan, 1. (2007), Supplier evaluation and management system for strategic sourcing based on a new multicriteria sorting procedure, International Journal of Production Economics, 1, 585-606
Ayers, J. B. (2001 ). Handbook of supply chain management. Boca Raton. Fla.: The St. Lucie Press/APICS Series on Resource Management.
Bagozzi, R. & Yi, Y. (1988), “On the evaluation of structural equation models”, Journal of the Academy of Marketing Science, 16 (1), 74-94.
Ciborra, C. U. (1993). Teams, markets and systems. Cambridge: Cambridge University Press
Cheti, C, Lin, T. & Huang. S. (2006). A ftizzy approach for supplier evaluation and selection in supply chain management, International Journal of Production Economics, 102 (2), 289-301.
Christopher, M. (1998). Logistics and Supply Chain Management, 2 Ed. New York: Financial Times/Prentice Hall
Christopher, M. (1998). Strategies for reducing costs and improving services. En Logistics and Supply Chain Management. London: Pitman Publishing
Chow, D., & Heaver, T. (1999). Logistics strategies for North America. En Global Logistics and Distribution Planning. 3rd ed.
De Boer, L., Labro. E. & Morlacchi, P. (2001). A review of methods supporting supplier selection, European Journal of Purchasing and Supply Management, 1 (2), 75-89.
Faez, F., Ghodsypour, S. & O'Brien, C. (2006). Vendor selection and order allocation using an integrated fuzzy case-based reasoning and mathematical programming model, International Journal of Production Economics, 1, 394-407.
Fornell, C. & Larcker, D. (1981). Evaluating structural equation models with unobservable variables and measurement error. Journal of Marketing Research, 18, (19, 39-50.
Forbes.com. (2006). Logistics glossary. Recuperado el 1 de July de 2011, de [Online] Avaible: http://www.forbes.com/fdc/logistics/glossary_d.shtml http://www.emeraldinsight.com/Insight/ViewContentServlet?Filename=Published/EmeraldFullTextArticle/Articles/0240150405.htm
Grant, D., Lambert, D., Stock, J., & Ellram, L. (2006). Fundamentals of logistics management, European Edn. Berkshire: McGraw-Hill Book Co.
Hair, J. F., Anderson, R. E., Tatham, R. L. & Black, W.C. (1995). Multivariate Data Analysis with Readings. New York: Prentice-Hall.
Hatcher, L. (1994). A Step by Step Approach to Using the SAS System for Factor Analysis and Structural Equation Modeling, Cary, NC, SAS Institute Inc.
Hernández, C. O., Aguilera, E. L. & González, A. M. (2014). The Influence of information Technology and communication Supply Chain management performance for greater sme manufacturing in Aguascalientes, International, Journal of Business, Economics and Management, 1(12), 382-396.
Hernández, C. O., Aguilera, E. L. & Colín, Salgado, M. (2013). La Gestión de los Proveedores: Estrategia clave para una mejor Gestión de la Cadena de Suministro en la Pyme Manufacturera en Aguascalientes. Estudios de Ciencias Sociales y Administrativas de la Universidad de Celaya, 3(1), 9-20.
Jitesh, T. (2008). Evaluation of buyer-supplier relationships using an integrated mathematical approach of interpretive structural modeling (ISM) and graph theoretic matrix: The case Study of Indian automotive SMEs Jitesh Thakkar, Journai of Manufacturing Technoiogy Management, l9 (1), 92-124.
Lee, S., & Peterson, S. (2000). Culture, entrepreneurial orientation, and global competitiveness. Journal of World Business, 35(4), 401-416.
Liao. Z. & Rittscher, J. (2005). A multi-objective supplier selection model under stochastic demand conditions, Internationaljournal of Production Economics, 105(1), 150-159.
Liu, F. & Hai, H. (2005). The voting analytic hierarchy process method for selecting Supplier, Internationaljournal of Production Economics., 97 (3), 308-317.
Little, A. (1999). A European Supply Chain (SC) survey, Available:http://www.adlittle.be/insights/studies/pdf/european_supply_chain_survey.pdf.
Masella, C. (2007). A contingent approach to the design of vendor selection systems for different types of co-operative customer/ supplier Relation ships, ¡nienmtional Journal of Operation.s and Production Management, 20( 1 ), 70-84.
Mbang, J. A. (2012). A new introduction to supply chains and supply chain management: Definitions and theories perspective. International Business Research, 5(1), 194-207.
Neely, A., Gregory, M., & Platts, M. (1995). Performance measurement system design: A literature review and research agenda. International Journal of Operations and Production Management, 15(4), [Online] Available:
New, S. & Philip P. (1995). Research Frameworks in Logistics: Three Models, Seven Dinners and a Survey, International Journal of Physical Distribution and Logistics Management, 25(10), 60-77
Nunnally, J.C. and Bernstein, I. H. (1994), Psychometric Theory, 3ª ed. New York: McGraw-Hill.
Osorio, G. J. C., Herrera, U. M. F. y Vinasco. M. A. (2008). Modelo para la evaluación del desempeño de los proveedores utilizando AHP, Ingeniería & Desarrollo, 23, 43-58.
Panayides, P. (2006). Maritime logistics and global supply chains: Towards a research agenda. Maritime Economics & Logistics, 8(1), 3-18. Recuperado de http://dx.doi.org/10.1057/palgrave.mel.9100147.
Pramatari, K. and Miliotis. P (2008). The impact of collaborative store ordering on shelf availability.Supply Chain Management, An International Journal, 13(1), 49-61
Raymond, L. and St-Pierre, J. (2005). Antecedents and performance outcomes of advanced manufacturing systems sophistication in SMEs. International Journal of Operations and Production Management, 25(5-6), 514-533.
Sarache, C. W. A., Castrillón, G. O. D. & Ortiz, F. L. F. (2009), Selección de proveedores: Una aproximación al estado del arte, Cuadernos de Administración de Bogotá, 22 (38), 145-167.
Simchi, L. D., Kaminsky, P., & Simchi, L. E. (2008). Designing and managing the supply chain: concepts, strategies and case studies. Tecc.com.au. (2002). [Online] Recuperado de http://www.tecc.com.au/tecc/guide/glossary.asp: International Edition: McGraw-Hill.
Simchi-Levi, D., Kaminsky, P. & Simchi-Levi, E. (2000). Designing and Managing the Supply Chain. 4ta. Ed. New York: Irwin McGraw-Hill
Tyan, J., Wang, F.K. & Du, T. (2003). An evaluation of freight consolidation policies in global third party logistics. Omega, 31, 55–62
Wisner, J.D. (2003). A Structural Equation Model of Supply Chain management Strategies and Firm Performance, Journal of Business Logistics. 24(1), 1-26.
Wong, W., & Wong, K. (2007). Supply chain performance measurement system using dea modeling. Industrial Management & Data Systems, 107(3), [Online] Recuperado de http://emeraldinsight.com/Insight/ViewContentServlet;jsessionid=E57B39C6CE4796DA8D44590D80E6077B?
Descargas
Publicado
2016-06-30
Cómo citar
Hernández Castorena, O., Aguilera Enríquez, L., & González Adame, M. (2016). Efecto gestión de la cadena de suministro en el desempeño de pyme manufacturera. Aguascalientes, México. Amazonia Investiga, 5(8), 22–31. Recuperado a partir de https://amazoniainvestiga.info/index.php/amazonia/article/view/699
Número
Sección
Articles
.gif)
